Free Fence Estimates in Huntsville & AL (256) 672-3584 Get Your Free Quote
Huntsville fence installers

Huntsville Fence Company & Builders

Serving Jones Valley and Five Points and all of Huntsville. Our contractors install privacy fences, aluminum fencing, chain link, and more with same-week estimates.

Licensed & Insured Contractor Network
Written Scopes
Same-Week Estimates
★★★★★ See our reviews on Google

Get Your Free Quote in Huntsville

Tell us about your project. We respond within one business day.

Huntsville Fence Quick Facts

Permit Required?

Usually No

No permit required for most residential fences. Historic districts (Twickenham, Old Town, Five Points) require Historic Preservation Commission approval.

Typical Cost Range

$25–$38/ft

Wood privacy fence, installed

HOA Presence

High

Most newer subdivisions have HOAs with fence requirements. Providence, Jones Valley, and MidCity developments typically require ARC approval.

Soil Conditions

Clay

Heavy clay soil common throughout. Posts set 30" deep with proper tamping. Rocky spots near Monte Sano.

Service Area

Huntsville area

Within our primary coverage zone

Most Requested

6ft board-on-board privacy fence for backyard

Local Tips for Huntsville

  • Call 811 before digging - TVA underground utilities common
  • Corner lots have clear-view triangle restrictions (no obstructions 2.5-15ft high)
  • Max height: 4ft front yard, 6ft side/rear yard

Recent Huntsville projects

Representative projects — details adapted from real installs in this area, names and specific addresses generalized

Neighborhood
Jones Valley
Installed
September 2025
Fence
6ft board-on-board cedar privacy on UC4B posts
Footage
187 ft
Gates
two 4ft walk gates with self-closing hardware

What our contractors ran into

Two of the back-corner post holes hit a limestone shelf at about 22 inches. Switching to rock-set posts with epoxy anchors added a half day and roughly $340 to the job, but it saved relocating the fence line by 3 feet (which would have meant a new HOA submittal and ~$1,800 in materials).

How it finished

Build wrapped in 2.5 days. The Jones Valley HOA cleared the drawings the same week the crew submitted. Stain went on three weeks later after the wood cured.

Neighborhood
Twickenham Historic District
Installed
March 2025
Fence
4ft period-appropriate wood picket, hand-finished
Footage
95 ft
Gates
one 3.5ft pedestrian gate

What our contractors ran into

Twickenham is on the National Register and any new fence needs Historic Preservation Commission approval. Standard modern picket profiles don't pass. Our contractors hand-cut pickets to match a documented 1900s-era profile on the adjacent property and provided HPC with photos of similar approved installs in the district. Approval cycle was about 5 weeks.

How it finished

Three days on-site for the build itself. The longer timeline was the HPC review. Homeowner reports neighbors have already asked who did the work.

Neighborhood
Providence
Installed
July 2024
Fence
5ft black aluminum ornamental, flat-top
Footage
165 ft
Gates
one 4ft walk gate with self-closing hinge

What our contractors ran into

Providence ARC requires aluminum or wrought-iron in front-yard runs and prohibits chain link entirely. Homeowner wanted aluminum to match the neighborhood look. Crew sourced a current-production panel matching the 3/4-inch picket spacing common across Providence and submitted the spec sheet with the ARC application — approval came back without revisions.

How it finished

Two-day install. Pool-code self-closing hardware on the gate even though the lot has no pool — saves a retrofit if a pool gets added later.

Neighborhood
MidCity
Installed
May 2025
Fence
6ft modern horizontal slat with steel-reinforced rails
Footage
142 ft
Gates
one 4ft walk gate

What our contractors ran into

MidCity covenants encourage modern materials. Standard vertical-picket privacy looks dated against the surrounding architecture. Horizontal slat needs reinforced framing — our contractors used steel angle along the back of each rail to prevent the sag that's common on horizontal-slat builds over 80 feet.

How it finished

Two-and-a-half-day install. Homeowner picked a dark stain that complements the trim color of the house. Fence reads as architectural feature, not perimeter.

Neighborhood
Monte Sano foothills
Installed
November 2024
Fence
6ft wood privacy, stepped for grade
Footage
210 ft
Gates
one 4ft walk gate

What our contractors ran into

Yard dropped about 11 feet across the back fence line plus rock at 14-18 inches in five separate post holes. Our contractors stepped the fence in 12-inch increments and switched the rocky posts to mechanical anchors. Added almost a full day of labor and roughly $580 to the rock-work line item.

How it finished

Three-day install. Monte Sano-adjacent lots almost always need rock allowance in the quote — we now flag this on every Monte Sano estimate.

Huntsville fence services we install

Aluminum & pool fencing

Pool-safe fence installation for Huntsville homes with self-closing gates and code-compliant hardware.

  • Self-closing, self-latching pool gate options
  • Panels and gates matched for a clean finish
  • Smart transitions for slopes and steps

Chain link fencing

Huntsville property owners choose our fence installation team for chain link durability and value.

  • Vinyl-coated options for durability
  • Privacy slats available for backyards
  • Strong corners and properly set posts

Repairs & gates

From hardware refresh to full panel replacement, our Huntsville repair crews get your fence back in shape fast.

  • Sagging gate fixes and hinge upgrades
  • Post reinforcement and section replacement
  • Latch alignment and hardware refresh

Wood privacy fences

Our Huntsville fence builders specialize in privacy fences with clean lines and dependable gates.

  • Board-on-board, shadowbox, or capped styles
  • Gate hardware chosen for frequent use
  • Optional stain and seal packages

Farm & acreage fencing

Professional farm fence installation around Huntsville for livestock, property lines, and long runs.

  • Woven wire, board, and mixed builds
  • Braced corners to handle long stretches
  • Drive gates sized for equipment access

Planning a fence in Huntsville

Permit requirements

Good news: No permit required for most residential fences in Huntsville.

Fence height limits

Corner lots: Clear-view triangle restrictions apply at intersections (no obstructions 2.5-15 ft in height within the sight triangle).

Approved & prohibited materials

Approved: Wood, vinyl, aluminum, chain link, ornamental iron

Huntsville fence installation details

Neighborhoods & areas in Huntsville

  • Jones Valley
  • Five Points
  • MidCity
  • Providence
  • Blossomwood

Neighborhoods & subdivisions in Huntsville

  • Dallas Mill Village Historic District
  • Edmonton Heights Historic District
  • Five Points Historic District
  • Jones Valley Estates
  • McThornmor Acres Subdivision Historic District
  • Medical District
  • Merrimack Mill Village Historic District
  • North Huntsville Industrial Park
  • Old Town Historic District
  • Rambling Oaks
  • Redstone Gateway
  • South Gate
  • Tannahill Estates
  • Twickenham Historic District
  • Willowbrook
  • Willowbrook Estates

ZIP codes in and around Huntsville

  • 35801
  • 35802
  • 35803
  • 35804
  • 35805
  • 35806
  • 35807
  • 35808
  • 35809
  • 35810
  • 35811
  • 35812
  • 35813
  • 35814
  • 35815
  • 35816
  • 35824
  • 35893

Estimate to install in Huntsville

2) Layout + approvals

Our contractors confirm the fence line, gate swings, and any HOA/permit steps that apply to your Huntsville address, then lock in the build plan.

1) Quick scope + estimate

Tell us the basics (footage, material, gates, terrain). We schedule an on-site look in Huntsville and send a clear written scope.

3) Clean install + walkthrough

Posts set straight, gates aligned, hardware checked. Our contractors do a final walkthrough and leave you with care tips for your Huntsville fence.

Frequently asked questions in Huntsville

How fast can you get a fence quote in Huntsville?

Most requests get a response within one business day. After we learn the basics (footage, gates, terrain, timeline), we schedule an on-site estimate and follow up with a written scope and next steps.

Which Huntsville neighborhoods require HOA approval before building a fence?

Most newer subdivisions have HOAs with fence requirements. Providence, Jones Valley, and MidCity developments typically require ARC approval. Send us your address with the quote request and we'll tell you what your specific HOA usually requires.

What does a new fence cost in Huntsville?

Wood privacy fence runs roughly $25–$38 per linear foot installed in Huntsville, depending on footage, gates, terrain, and material grade. The written quote breaks down each line item so you can see exactly what drives the total.

What's the most common fence request you get in Huntsville?

Right now the most common request we see in Huntsville is: 6ft board-on-board privacy fence for backyard. That doesn't mean it's the right answer for your property — but it tells us what most local homeowners are prioritizing.

Is there anything specific to Huntsville I should know before getting a fence?

A few local notes we mention to most Huntsville homeowners: • Call 811 before digging - TVA underground utilities common • Corner lots have clear-view triangle restrictions (no obstructions 2.5-15ft high) • Max height: 4ft front yard, 6ft side/rear yard We walk through these during the estimate so nothing is a surprise.

Will you confirm property lines before building?

Yes. We verify the planned layout with you before any digging. If a stamped survey is needed for Huntsville — Decatur and a few other jurisdictions require one for the permit — we'll recommend an AL-registered surveyor.

Read what Huntsville customers say

Real reviews live on our Google Business Profile. We post project photos and let homeowners write the rest.

See Reviews on Google

Nearby service areas